DAS-8006 IUS
Wireless Reader System

Features

The DAS-8006-IUS Reader is a portable system for reading ID data from all BMDS IMI implantable transponders (IMI-400, IMI-500, and IMI-1000).

Data collected by the reader is displayed on a bright OLED screen and can be transmitted to any device connected via the direct USB Serial connection. An optional wireless CM-8000 module can further allow for wireless transmission of any data to a nearby computer. This can be done in real-time or from the saved data in the reader’s memory.

Unique to BMDS readers is the capability of ID mapping. The read-only encrypted identification stored on each IMI transponders can be converted to a user-friendly mapped ID stored directly on each reader.

Wireless

Optional Wireless Communications Module with USB serial and USB Keyboard Output. 

The DAS-8006 IUS has a combined display for displaying captured ID data and for providing a control interface for various menu-driven options. As a portable system, DAS-8006 IUS includes a small separate communications module that provides a wireless data link between the reader and a computer. The reader comes with a recharging adapter and the lithium rechargeable batteries are user-replaceable.

There is a complete user menu that provides features such as timestamp, ID storage, setup, programming, temperature display, and battery level. The wireless communication module includes both a USB serial port and a USB keyboard output. Powered by the USB connection, each module has a unique “Link ID” number that the user can program into the reader for creating a dedicated wireless communications link. Signal strength indication is provided with a 20’ receive distance.

The reader can also be used directly connected to recharging adapter in auto mode. Such usage, the reader continues to charge, thus making sure the unit is always ready for portable operation. Though the DAS-8006 IUS is primarily a hand-held system, there are special order options for stand mounting, an optional wired USB serial, and direct power barrel connection.

Transponder Compatibillity

IMI-400

IMI-500

IMI-1000

Optional Accessories

Peer-to-Peer Com Module

Power Supply

Replacement Lithium-Ion Batteries

DASHost 8000 Software

Reader Stand

  • Super Bright OLED Display
  • Separate Sequencing LED Indicating Active Scan providing Better Feedback to User
  • Hybrid Scanning Coils that Produces More Forward Read Zone.
  • Time and Date Stamp
  • Full Menu-Driven Setup with Password Protection
  • ID Mapping can store in memory up to 10,000 cross-referencing transponder ID
  • User Selectable Serial Port Parameters
  • Good Read and Data Transmit Indication
  • 12 Volt International Power Supply for Recharging
  • Direct Power and Charging via Barrel Connection 12 Volt International Power Supply
  • Battery: Two 3.7 Li-ion 3000mAH User Replaceable
  • Comes with Wireless Communications Module that has Both USB Serial and USB Keyboard Output
  • Wireless Over Secure P2P ZigBee Protocol 903MHz ISM Band (Industrial, Scientific, Medical)

IMI-400 Smallest Read Only Transponder

IMI-500 Read-Only
Transponder

IMI-1000 Industry Standard Read-Only Transponder

Contact BMDS

If you prefer to email us directly, please click here.

You can always reach us via our toll-Free number below.

(800) 526-BMDS (2637)

(302) 628-4100

1 Silas Road Seaford, DE 19973 USA