DAS-8016
DAS-8017
Pocket
Reader

Features

The Pocket Readers are handheld electronic systems for reading and displaying the user ID in BMDS transponders. The system is small in size and is a completely self-contained portable reader. It can be connected directly to a computing device’s USB port where it is detected as a serial port through which data can be transmitted. A wireless keyboard out is also accessible.

 The DAS-8016 reads IMI transponders and the DAS-8017 reads both XPT and IPT transponders. The display uses the latest OLED technology supplemented by sequencing LEDs for low RF noise scan indication. A critical design element is the 1/2 size reader scan head. This new head, while naturally reducing the overall bulk and size of the reader, also offers a more focused read zone. The unit includes a built-in low voltage charging circuit so that the unit can be recharged and operated directly via it USB plug connection. The battery is a single 18650 lithium-Ion battery which may be replaced by the user. The unit has a membrane keypad that includes basic scan functions, plus a full menu capability for entering unit set up.

Distinctive characteristics:

  1. Small size – making it a good match for handheld tablets and portable computers
  2. Portable operation via internal, rechargeable, Lithium-Ion battery
  3. Auto read mode for non-portable, stand-mounted, continuous read, applications.
  4. Ability to directly operate and charge via a standard serial data USB port with no additional interface hardware.
  5. Wireless ability to link as standard Bluetooth HID equipped device or connect to a BMDS secure Peer-to-Peer radio com module.

Data I/O:

Built-in Full Size Connector Serial USB Out
Built-in Keyboard Configured Wireless Bluetooth
Option to add Wireless Interface via unit Menu
(BMDS Wireless Com Module has both Keyboard and Serial USB out)

Mechanical:

2.14” Wide by 1.61” High by 8.53” Long
Polycarbonate ABS Alloy Housing
Chemical Resistant Polyester Control Panel

Note: XPT/IPT version does NOT read IPTT temperature or XPT alternative fixed ID  

Transponder Compatibillity

IMI-400 with the DAS-8016

IMI-500 with the DAS-8016

IMI-1000 with the DAS-8016

XPT-100 with the DAS-8017

IPT-300 with the DAS-8017

IPTT-300 with the DAS-8017

Optional Accessories

USB Data Cable

Peer-to-Peer Com Module

USB Power Supply

USB Data Cable

Replacement Lithium-Ion Batteries

DASHost Software

Reader Stand

  • BMDS Lowest Cost Reader with display
  • Read Only
  • Small Hybrid Scan Head for easier orientation 
  • Bright OLED Data Display
  • Ability to Store and Download about 500 IDs
  • Powered via Single Lithium 18650 battery
  • Recharge via unit’s USB Data Port
  • Compact Size and Light Weight
  • Sequencing Scan LEDs
  • Display with 16 X 2 Characters with Scrolling for longer IDs
  • Menu Selectable Display Orientation
  • Large Scan Button with Instant Double Press ON
  • Button Control of Auto Scan Mode
  • Menu Control of Automatic OFF
  • Menu Control of Beep
  • Menu Selectable Data Output Delimiters

IMI-400 Smallest Read Only Transponder

IMI-500 Read-Only
Transponder

IMI-1000 Industry Standard Read-Only Transponder

XPT-100 X-Tra Small Programmable Transponder

IPT-300 Implantable Programable Transponder

IPTT-300 Implantable Programable Temperature Transponder

Contact BMDS

If you prefer to email us directly, please click here.

You can always reach us via our toll-Free number below.

(800) 526-BMDS (2637)

(302) 628-4100

1 Silas Road Seaford, DE 19973 USA