DAS-8020
Data Display
& Interface

Features

The DAS-8020 Data Acquisition unit is part of a two piece system for reading the ID data from BMDS Implantable Micro-Transponders. In use, it is connected and partnered to a BMDS Smart Probe; either a RSP-8004 probe for reading IMI Micro-Transponders or an RSP-8025 probe for reading XPT, IPT- 300/IPTT-300 transponders. The DAS-8020’s dual role is to provide clean isolated power to the probe while receiving the captured transponder data back from the probe. This transponder data is then displayed and can be sent out to its various output data ports for connection to a computer or terminal.

The DAS-8020 comes with a heavy metal base but can also be configured to mount directly to the Smart Probe stand with no additional parts.

There are three data ports: USB Serial, USB Keyboard, and RS232 Serial with a DB9 connector. There is a front panel switch for turning off both the unit and the attached probe. In addition to the bright easy to read display, there is an LED indication for USB connection status and probe power.

The DAS-8020 makes use of two microprocessors, one for data transmission and one for the advanced OLED display. This provides a very robust platform for data integrity and future flexibility. USB ports are kept active at all times to avoid port resets on the interfacing computer. Digital Isolation is used for the RS-232 to avoid RF noise contamination via a computer.

Transponder Compatibillity

IMI-400 with the RSP-8004

IMI-500 with the RSP-8004

IMI-1000 with the RSP-8004

XPT-100 with the RSP-8025

IPT-300 with the RSP-8025

IPTT-300 with the RSP-8025

Optional Accessories

USB Data Cable

Coil Probe Cable

LINC Power Supply

Probe Stand

DASHost Software

  • 20 Character by 2 Line OLED Bright Display
  • LED Indication of USB Connection Status
  • Front Power Switch for Probe and Display
  • Heavy Base for Stability
  • Single International Power Supply
  • Isolation Circuity to Protect Performance
  • Can Display Both Original ID and Mapped ID Simultaneously
  • 4.2” Wide by 3.8” High by 2.3” Depth (Including base: 4.2” Depth)
  • Smart Probe Input Port using 6 pin Custom Cable
  • USB Serial Port (Full Size)
  • USB Keyboard Port (Full Size)
  • RS-232 Serial DB9 Connection
  • 12 Volt Power Supply Barrel Connection

IMI-400 Smallest Read Only Transponder

IMI-500 Read-Only
Transponder

IMI-1000 Industry Standard Read-Only Transponder

XPT-100 X-Tra Small Programmable Transponder

IPT-300 Implantable Programable Transponder

IPTT-300 Implantable Programable Temperature Transponder

Contact BMDS

If you prefer to email us directly, please click here.

You can always reach us via our toll-Free number below.

(800) 526-BMDS (2637)

(302) 628-4100

1 Silas Road Seaford, DE 19973 USA